AOC B101AW01(V2)

Discussion in 'Monitor' started by ThienBui, Dec 10, 2014.

  1. ThienBui

    ThienBui There's always more to learn.
    Staff Member

    Joined:
    Dec 13, 2013
    Messages:
    28,792
    Likes Received:
    2,346
    B101AW01(V2)
    1. Handling Precautions

    1) Since front polarizer is easily damaged, pay attention not to scratch it.

    2) Be sure to turn off power supply when inserting or disconnecting from input connector.

    3) Wipe off water drop immediately. Long contact with water may cause discoloration or

    spots.

    4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.

    5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard

    surface.

    6) Since CMOS LSI is used in this module, take care of static electricity and insure

    human earth when handling.

    7) Do not open nor modify the Module Assembly.

    8) Do not press the reflector sheet at the back of the module to any directions.

    9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor

    tilt the Interface Connector of the TFT Module.

    10) After installation of the TFT Module into an enclosure (Notebook PC Bezel, for

    example), do not twist nor bend the TFT Module even momentary. At designing the

    enclosure, it should be taken into consideration that no bending/twisting forces are

    applied to the TFT Module from outside. Otherwise the TFT Module may be

    damaged.
     

    Attached Files:

Tags:

Share This Page

  • Get Help Fast

    • 0919.47.6686
    • Skype: Vinafix
    • [email protected]
    • www.vinafix.vn
    • www.vinafix.net

    Payment Methods
  • Upgrades

  • Calculate the voltage

    Input V in : V
    R a : Ω
    R b : Ω
    Output V out : V
iHax Community