SatelliteP100 & Satellite Pro P100 Open Wi-FiCover Remove Mini Card Wi-Fi card Locate & Short Out JP8 for 5 Seconds Remove short and turn on NO BOOT Press & Hold Power button to turn off Turn on again & password is cleared SatelliteL10, L20, L30 & Satellite Pro L20 Open Wi-FiCover Locate & Short Out JP1 for 15 Seconds (Satellite L10) Satellite L20/Pro L20 short out G1 SatelliteM100 & Tecra A6 Open MemoryCover Remove Memory Remove Black plastic insulation Locate & Short CMOS CLR1 for 15 Seconds NOTE: All the following models use the same password removal process. Satellite:17xx Series, 1000, 1110,1130, 1200, 1900, 2430, 3000 P20,P30, P33, A30, A70,A80, M40X, M50,M60, M70, M100 TecraA3/S2, A5, A6 The jumper isalways located under or near the memory modules Depending on the model the jumper could be labelled J1, J2, J5, J7, J9 or CMOSCLR1 (M100 & A6) Satellite,Equium A100 & Tecra A7 1.Remove Stripcover 2.Remove 2 x K/B screws 3.Move K/B Unit up but don’t disconnect 4.Release & Remove Mini Card Wi-Fi Card 5.Locate & short C88 Pin 1 & 2 together 6.Power on Machine while still shorting Pin 1 & 2 7.As soon as the Toshiba logo appears, remove short 8.If machine boots, Password has been removed Satellite A100 (PSAA2A-02C01N) 1.RemoveMemory Cover from base of machine 2.Release & remove right side Memory Module 3.Lift black plastic insulation 4.Locate & short PAD500 Pin 1 & 2 together 5.Power on machine while still shorting Pin 1 & 2 6.As soon as the TOSHIBA logo appears, remove short 7.If machine boots, password has been removed TECRA A4 & Satellite M40 1.Open modem& Wi-Fi card cover 2.Remove mini PCI Wi-Fi card 3.Lift up black plastic 4.Locate & short C738 Pin 1 & 2 together 5.Power on machine while still shorting Pin 1 & 2 6.As soon as the TOSHIBA logo appears, remove short 7.If machine boots, password has been removed TECRA S1 1.Open palmrest cover 2.Remove mini PCI Wi-Fi card 3.Lift up black plastic 4.Locate & short C5071 Pin 1 & 2 together 5.Power on machine while still shorting Pin 1 & 2 6.As soon as the TOSHIBA logo appears, remove short 7.If machine boots, password has been removed TE-2300 1.Remove 2 xB12 screws from bottom of system 2.Remove strip cover 3.Remove keyboard screws 1 x B2.5 & 1 x SF4 4.Remove 1 x 4mm screw & Wi-Fi cover 5.Remove mini PCI Wi-Fi card if fitted 6.Locate & short points as shown in picture below 7.Power on machine while still shorting points 8.Short for 5 seconds 9.Nothing will appear on the screen 10.Turn system off holding down power button 11.Password is now removed Satellite A60 1.Open Wi-Fislot cover 2.Lift up black plastic 3.Locate & short C561 Pin 1 & 2 together 4.Power on machine while still shorting Pin 1 & 2 5.As soon as the TOSHIBA logo appears, remove short 6.If machine boots, password has been removed. Satellite Pro L40 1.Open Wi-Fi & RAM slot cover 2. Locate JRST1 Between Ram and Wifi slot 3.short JRST1 AND TURN ON SYSTEM. 4. Short for 15 seconds. 5. system is shutdown automatic. 6.turn on the system password is removed. Toshiba Satellite Pro L650 Locate G1 or c513 and G2 or C514 to reset Bios In some models it will be B500 under ram cover Works on satellite L650. Importantly, the “B500″. For better contact, welded a small copper wire between the two plots “B500″. Place one strip of memory start. Display the first page of the bios and then extinction of the laptop alone. Remove the small copper wire and put the remaining memory. Restart and that’s OK. Toshiba Satellite L700/750 open ramcover locate G1 for bios reset Toshiba Satellite M60 open ramcover locate J2 for bios reset Toshiba Satalite C850 Open ram cover locatae B500 short it for a minute restart your laptop with bios password.