I.Installation and Operating Precautions
To ensure safety and prevent possible damage to the rework station, it is required to install the
rework station at a location complying with the following conditions.
◆ Away from inflammables.
◆ Free from splashing of water or other liquids.
◆ Free from the direct airflow impact from air conditioner, heater or ventilator.
◆ With good ventilation, dry location, free from excessive dust.
◆ Free from vibration or shock, at a stable and flat location.
Power Supply
Power and voltage should meet the following requirements:
Use the power supply with little voltage fluctuation
Voltage fluctuation： AC220V±10%。
Frequency fluctuation： 50/60Hz±0. 3%
Space Requirements
To facilitate operation, component replacement and maintenance for the rework station, it
is required to reserve >300mm space at the back of the rework station.
